Test & Measurement Tools

Product Details:

We are an acclaimed name engaged in offering our precious clients a superior quality range of Flexible Clamp Meters. These meters are manufactured using optimum grade raw material and sophisticated technology in synchronization with industry standards. In order to ensure quality, the entire range is rigorously tested on various parameters by our quality controllers. Keeping in mind the diverse requirements of our clients, we provide these meters in various specifications at affordable prices.

Features:

• Compact design
• Trouble-free operation
• Less power consumption

Take accurate measurements in tight or awkward spots:

• Snake the coil around obstacles with ease, even in deep, crowded cabinets

Tricky conductors conquered:

• True RMS AC Current up to 3,000 Amps for multiple conductor measurements

Inrush current:

• Measure hard and soft start-up inrush current spikes while equipment is ramping up
• Standalone flexible clamp meterDisplays the readings you need for easy inspection and navigation

Bluetooth Connectivity:

• Connect to Android devices for remote diagnostics in hard-to-reach or hazardous areas. Multiple units wirelessly connect for remote viewing of multiphase systems. Also, upload data without the need for special cords with FLIR Tools Mobile.

Limited Lifetime Warranty with Registration Choose from two flexible coil lengths:

• CM55 - 10” (25.4cm) for easy maneuverability and compact convenience
• Bright, dual LED worklights
• Work safely and easily in poorly lit locations – especially useful when the lights are out or obstacles block your inspection targets
• Drop tested to 3 meters
• Portable, lightweight, and tangle-free without compromising measurement range.

Additional Information:

• Item Code: CM55

Product Details:

FLIR CM57
Flexible Clamp Meter

The FLIR Flexible Clamp Meters with Bluetooth® are ergonomic tools designed to simplify difficult current measurements. Made with a narrow flexible coil clamp, the CM57 let you easily take measurements in tight or awkward spots — a difficult task with a traditional hard jaw clamp meter. With Bluetooth communication for remote viewing and data transfer to iOS® and Android™ devices via the FLIR Tools mobile app, quickly share and analyze data right from the jobsite.

Take accurate measurements in tight or awkward spots

Snake the coil around obstacles with ease, even in deep, crowded cabinets

Tricky conductors conquered

True RMS AC Current up to 3,000 Amps for multiple conductor measurements

Inrush current

Measure hard and soft start-up inrush current spikes while equipment is ramping up

Standalone flexible clamp meter

Displays the readings you need for easy inspection and navigation

Bluetooth Connectivity

Connect to Android devices for remote diagnostics in hard-to-reach or hazardous areas. Multiple units wirelessly connect for remote viewing of multiphase systems. Also, upload data without the need for special cords with FLIR Tools Mobile.

Limited Lifetime Warranty with RegistrationBright, dual LED worklights

Work safely and easily in poorly lit locations – especially useful when the lights are out or obstacles block your inspection targets

Drop tested to 3 meters

Portable, lightweight, and tangle-free without compromising measurement range

• CM57 - 18” (45.72 cm) for larger and multiple conductor measurements, double-wrap requirements, and deeper access

 

Additional Information:

• Item Code: CM57

Product Details:

The FLIR IM75 is both an advanced multifunction digital multimeter and premier handheld insulation tester for installation, troubleshooting and maintenance professionals. The IM75 includes several specialty insulation modes including: Polarization Index, Dielectric Absorption and Earth Bond Resistance. Insulation tests can be performed instantly, continuously and over a timed duration for in-depth assessment.

Combo Insulation / DMM in One

Have all the functions you need in one combination package – don’t run to the truck mid job for another meter!

Advanced Insulation Modes

Confirm your insulation resistance Insulation Resistance up to 20 GΩ, PI, DAR, Earth Bond Resistance

Versatile

Multiple ranges of resistance insulation test levels available for testing electrical power lines down to telecom and low voltage systems via rotary switch: 50V, 100V, 250V, 500V, 1000V

Easy Compare

When reviewing results in Compare Mode, the dedicated Pass / Fail multi-color LED indicator makes determinations clear and visible. (NOTE COLORS)

DMM Built-in

True RMS DMM measurements features reliable performance and 1000V range

VFD Mode

Accurately analyze non-sinusoidal waveforms and noisy signals in VFD motors and drive controllers.

METERLiNK Compatibility

Embed electrical measurements into thermal images captured by METERLiNK-enabled FLIR IR cameras for easier documentation.

Bluetooth Connectivity

Connect to iOS™ and Android™ devices for remote diagnostics in hard-to-reach or hazardous areas. Also, upload data without the need for special cords.

Bright Dual-LED Worklights

Make your work safer/easier in poorly lit locations – especially useful when the lights are out or obstacles block your inspection targets.

Rugged & Shock-Resistant

Double-molded case design and extra thick rubber on the corners absorbs shock to enhance job-site reliability and long-haul durability (IP54, 2m Drop Test).

Additional Information:

• Item Code: IM75

Product Details:

The FLIR VP52 is a tough, CAT IV-rated Non-Contact Voltage Detector featuring a combination of alerts – including tactile vibration, red LED alarms, and a powerful LED worklight— so you’ll never miss the presence of voltage even in dark or noisy areas. Engineered to reliably detect voltages on the latest tamperproof outlets and electrical systems installed using modern construction methods, the VP50 is useful when both working with safety outlets or detecting voltage in high powered equipment and low voltage systems.

Rugged and Durable.
Designed for long product life cycles

• 3m (9.8’) drop tested

• Industry leading lifetime warranty with registration

• Robust pocket clip and screw on battery door

Enhanced Detection.

Reliably detects voltage in the latest safety outlets

• Low-profile probe tip gets the sensor closer to electrical sources

• Enhanced sensitivity to help detect voltage in the latest safety outlets.

• Detect voltage in electrical systems in large industrial facilities, residential low voltage installations, and systems located behind obstructions (using High Sensitivity mode)

Intelligent Design.
Built to reduce chance of dropping, and to maximize battery life

• Anti-roll case with double molded sip resistant grip

• Vibration and Mult-color flashing LED alarms for voltage indication

• Lights on both sides: Bright LED flashlight on the back and convenient light on the tip for detection

Additional Information:

• Item Code: VP52

Product Details:

Engineered with Versatility to Help You Manage Power Analysis & VFD Troubleshooting

The FLIR CM83 is an industrial-grade Power Clamp Meter engineered with advanced power analysis and VFD filtering functions required by electrical troubleshooters.

VFD Mode:

• Accurately analyze non-sinusoidal waveforms and noisy signals in VFD-controlled equipment.

Harmonics Mode:

• Locate noise from different electrical draws to realign harmonics and reduce electro-mechanical equipment stress.

Phase Rotation:

• Analyze three-phase systems to measure power draw and verify if power is evenly balanced.

Inrush Current:

• Measure hard and soft start-up inrush current spikes while equipment is ramping up.

Meter Link Compatibility:

• Embed electrical measurements into thermal images captured by METERLiNK-enabled FLIR IR cameras for easier documentation.

Power Factor and Active Power:

• Monitor power quality improvements, such as start-up realignments on three-phase equipment.

Bluetooth Connectivity:

• Connect to Android devices for remote diagnostics in hard-to-reach or hazardous areas. Also, upload data without the need for special cords.

Bright Dual-LED Worklights:

• Make your work safer/easier in poorly lit locations – especially useful when the lights are out or obstacles block your inspection targets.

Rugged & Shock-Resistant:

• Double-molded case design and extra thick rubber on the corners absorbs shock to enhance job-site reliability and long-haul durability.

Additional Information:

• Item Code: CM83

Product Details:

Packed with Features that Help Take the Guesswork Out of Your Electrical Troubleshooting so You Can Handle the Toughest JobsThe new FLIR DM93 is a world-class digital multimeter with advanced VFD filtering to help you accurately analyze non-sinusoidal waveforms and noisy signals found in VFD-controlled equipment.
VFD Mode:

• Accurately analyze non-sinusoidal waveforms and noisy signals in VFD motors and drive controllers.

LoZ Mode:

• Use the Low Impedance Input filter to eliminate ghost voltage readings in long-run applications.

Bright Dual-LED Worklights:

• Make your work safer and easier by illuminating dimly lit inspection areas.

Rugged, Shock-Resistant:

• Double-molded rubber case design enhances reliability on the job site and durability for the long haul.

Convenience Features:

• No need to select AC or DC Mode for quick tests
• Backlight features user-configurable timeout
• Large, sharp display is easy to see
• Tool-less battery changing
• Built-in tilt stand

Additional Information:

• Item Code: DM93

Product Details:

We are instrumental in offering our clients a high quality range of True RMS Industrial Multimeter. It offers advanced variable frequency drive filtering to help you accurately analyze non-traditional sine waves and noisy signals. The offered meter is meticulously tested on various quality parameters. Provided meter is manufactured by utilizing optimum quality raw material and latest technology. In line with industry standard, we provide the entire range in various customized options and at affordable prices.

Features:

• No need to select AC or DC Mode for quick tests
• Backlight features user-configurable timeout
• Large, sharp display is easy to see
• Tool-less battery changing
• Built-in tilt stand

VFD Mode:

• Accurately analyze non-sinusoidal waveforms and noisy signals in VFD motors and drive controllers.

LoZ Mode:

• Use the Low Impedance Input filter to eliminate ghost voltage readings in long-run applications.

Bright Dual-LED Worklights:

• Make your work safer and easier by illuminating dimly lit inspection areas.

Rugged, Shock-Resistant:

• Double-molded rubber case design enhances reliability on the job site and durability for the long haul.

Convenience Features:

• No need to select AC or DC Mode for quick tests
• Backlight features user-configurable timeout
• Large, sharp display is easy to see
• Tool-less battery changing
• Built-in tilt stand

Additional Information:

• Item Code: DM92

Product Details:

True RMS Power Clamps

FLIR CM85 offers an excellent choice of industrial-grade Power Clamp Meters engineered with advanced power analysis and variable frequency drive filtering functions required by electrical troubleshooters.

VFD Mode:

• Accurately analyze non-sinusoidal waveforms and noisy signals in VFD-controlled equipment.

Harmonics Mode:

• Locate noise from different electrical draws to realign harmonics and reduce electro-mechanical equipment stress.

Phase Rotation:

• Analyze three-phase systems to measure power draw and verify if power is evenly balanced.

Inrush Current:

• Measure hard and soft start-up inrush current spikes while equipment is ramping up.

Meter Link Compatibility:

• Embed electrical measurements into thermal images captured by METERLiNK-enabled FLIR IR cameras for easier documentation.

Power Factor and Active Power:

• Monitor power quality improvements, such as start-up realignments on three-phase equipment.

Bluetooth Connectivity:

• Connect to Android devices for remote diagnostics in hard-to-reach or hazardous areas. Also, upload data without the need for special cords.

Bright Dual-LED Worklights:

• Make your work safer/easier in poorly lit locations – especially useful when the lights are out or obstacles block your inspection targets.

Rugged Shock-Resistant:

• Double-molded case design and extra thick rubber on the corners absorbs shock to enhance job-site reliability and long-haul durability.

Additional Information:

• Item Code: CM85

Product Details:

The FLIR Universal Flex Current Probe accessories are designed to add capabilities, simplify challenges, and get the best readings with your existing meter. Made with a narrow flexible coil clamp, the TA72 and TA74 let you easily take measurements in tight or awkward spots — a difficult task with a traditional hard jaw clamp meter. The connection is a standard banana plug and the output is a voltage signal, so it’s compatible with most DMMs and clamp meters, regardless of brand.

Take accurate measurements in tight or awkward spots

Snake the coil around obstacles with ease, even in deep, crowded cabinets

Tricky conductors conquered

Measure multiple conductors and targets with limited clearance

Switchable AC current range

30A, 300A, 3000A

Compatible with most DMMs and clamp metersStandard banana plug connectors fit most meters, and AC voltage output enables wide compatibility

Bright, dual LED work lights

Make your work safer/easier in poorly lit locations – especially useful when the lights are out or obstacles block your inspection targets

Drop tested to 3 meters

Portable, lightweight, and tangle-free without compromising measurement range

Limited Lifetime Warranty with Registration
Choose from two flexible coil lengths

• TA72 - 10” (25.4cm) for easy maneuverability and compact convenience
• TA74 - 18” (45.72 cm) for larger and multiple conductor measurements, double-wrap requirements, and deeper access

Additional Information:

• Item Code: TA72-TA74

Product Details:

Maneuver into extremely tight operating environments to uncover hidden problems and solve issues

Narrow Cameras

Gain access into tight spaces to uncover hidden problems, by delivering clear and sharp video and images to a large 5.7" color LCD display.

Versatile Controls

Intuitive handset controls enable users to select wide-angle 180-degree or 90-degree viewing angles with a simple press of the switch.

Reliable Design

Long battery life coupled with flexible USB charging options – including car charger – keeps your FLIR VS70 on the job for the entire day.

Shock-Resistant

Double-molded, rubber-reinforced case design is water- and dustproof, and capable of withstanding drops from up to two meters high.

Video Capability

Instead of attempting to capture time-sensitive still images, record dynamic video that better illustrates the nature of problems. Also, grab still images from captured video directly on the FLIR VS70.

Voice Annotations

The included headset allows for easy voice annotation during deep-dive inspections to clarify findings and simplify reporting.

SD Card/USB

The VS70 includes SD card storage of video, image, and audio files, as well as an on-board USB port for file transfer and battery charging.

Additional Information:

• Item Code: VS70